• San Martin 1000 meters waterproof watch diving watch ice hockey mechanical watch SN001-G-LJM
    $369.00 $229.00
    Rated 0 out of 5

    Model: SN001-G Movement: Time Module NH35 [Automatic movement], ± 15 seconds / day VS37 [Solar Quartz Core] Case: Material-316L stainless steel 46mm diameter (without crown) 17mm thick Crystal: Sapphire crystal with anti-reflective coating inside Bezel: ceramic bezel / 316L stainless steel bezel with luminous Dial: blue and black Hands: steel hands, filled with luminous Luminous: C3 Super Luminous for Dial (Luminous Color: Green) BGW-9 super luminous for hands and ceramic bezel (luminous color: blue) BGW-9 for stainless steel bezel, C3 for 12 o'clock Crown: screw-in, three-dimensional shark logo Case back: three-dimensional oil pressure, shark pattern Strap: Professional diving rubber strap Width 22 * 22mm Buckle: stainless steel pin buckle Waterproof: 1000m saturation diving level Warranty: Two-year warranty (The above data is subject to errors due to manual measurement. Please refer to the actual product.)

  • San Martin original design diving watch GR5 titanium metal men’s mechanical watch limited edition SN027-T1
    $435.00$692.00
    Rated 0 out of 5

    Original Design Model Model: SN027-T1 Movement: SW200-1 [automatic mechanical movement] Error: Observatory error standard, -4 to +6 seconds Case: Material - GR5 Titanium Diameter: 43mm (excluding crown) Length: 51mm (including the lugs) Thickness: 18mm (including the mirror) Lug Width: 22mm (with the inside of the strap) Crystal: Shaped sapphire, coated with Swiss anti-reflective film Bezel: five-grade titanium chronograph ring, luminous scale Dial: black enamel surface, metal nails Hands: water-grinding R-shaped steel needle, filled with luminous Luminous: BGW-9 super luminous (light color: blue) Crown: screw-in type, drip bulge Caseback: screw-in Caseback Strap: Shark Leather Strap Clasp: pin buckle Waterproof: 200 meters waterproof Warranty: Two-year warranty (The above data may be subject to manual measurement errors, please refer to the actual product.)

  • San Martin Pilot Watch Mechanical Watch With See-Through Caseback SN060-G
    $219.00$373.00
    Rated 0 out of 5

    Model: SN060-G Movement: automatic mechanical movement: PT5000/SW200 Case: Material - 316L stainless steel 42mm in diameter (excluding crown) Length:51mm (including lugs) Thickness:12mm (including crystal) Lug width 22mm (with the inside of the strap) Total weight: about 81g Crystal: sapphire crystal Dial: black, red, brown, blue Hands: steel hands, filled with luminous Luminous: C3 Super Luminous (Glowing Color: Green) Crown: push-pull Caseback: screw-in sapphire Caseback Strap: top layer leather belt, width 22*18mm Clasp: 316L stainless steel pin buckle Waterproof: 100 meters waterproof Warranty: Two-year warranty (The above data may be subject to manual measurement errors, please refer to the actual product.)

  • San Martin Diving Watch GMT Watch SN005-G
    $529.00 $399.00
    Rated 0 out of 5

    Model: SN005-G(Custom logo available, please click this link to see custom logo options and cost) Movement: Hangzhou 6460 movement [automatic mechanical movement] Case: Material-316L stainless steel Diameter 40.5mm (without crown) Lug to Lug length 48mm Thickness of about 13.5mm (including mirror) Lug Width 20mm Crystal: Domed sapphire crystal + Swiss AR Coating Bezel: sapphire curved bezel insert filled with luminous inside Dial: matt black/white enamel dial + printed three-dimensional hour markers Hands: GS craft manual batch hand, second hand with flat cap Luminous: Retro luminous effect (luminous color: yellow-green) Crown: screw-in crown with shark logo Caseback: Screw-in solid Caseback Bracelet: solid five-ball steel bracelet Clasp: solid clasp Waterproof: 200 meters waterproof Total weight: about 140g Warranty: Two-year warranty (The above data is that there may be errors in manual measurement, please refer to the actual product.)

  • Handmade TUNA leather strap 22mm pin buckle LS-02
    $40.00$49.00
    Rated 0 out of 5

    Model: LS-02 Brand: San Martin Size: 22mm-20mm Buckle style: pin buckle Accessory Type: Leather Strap

  • SAN MARTIN original style octopus with leather strap mechanical watch steel SN025-G
    $435.00$745.00
    Rated 0 out of 5

    Model: SN025-G Movement: SW200/PT5000 Mechanical Movement Case: Material - 316L stainless steel 45mm in diameter (excluding crown) Length:49mm (including lugs) Thickness:13.9mm (including crystal) Lug width:22mm (with the inside of the strap) Crystal: sapphire crystal With AR-Coating Dial: Mother-of-pearl Hands: Multi-faceted batch of luminous needles processed by GS process Luminous: BGW-9 Super Luminous (Glowing Color: Ice Blue) Crown: Screw-in, size 8mm Caseback: hydraulic octopus three-dimensional Caseback Strap: Leather Strap Waterproof: 200M Weight: about 170g Warranty: Two-year warranty

  • San Martin diving watch automatic mechanical watch waterproof and luminous SN040-G
    $309.00 $201.00
    Rated 0 out of 5

    Model: SN040-G(Custom logo available, please click this link to see custom logo options and cost) Customized logo available, please feel free to contact online customer service. Movement: TIME MODULE NH35A [automatic mechanical movement] Case: Material - 316L stainless steel 40mm in diameter (excluding crown) Thickness:13.5mm (including crystal) Lug width:20mm (with the inside of the strap) Crystal: sapphire crystal Bezel: ceramic timing scale Dial: black / blue / green [customizable logo] Hands: steel needle, filled with luminous Luminous: C3 Super Luminous (Glowing Color: Green) Crown: screw-in Caseback: screw-in three-dimensional hydraulic caseback Strap: professional diving tape, width 20mm Weight: about 110g Buckle: 316L stainless steel buckle Waterproof: 200 meters waterproof Warranty: Two-year warranty (The above data may be subject to manual measurement errors, please refer to the actual product.)

  • SAN MARTIN Dive Watch with large case mechanical movement SN0077-G
    $399.00$545.00
    Rated 0 out of 5

    Model: SN0077G Movement: PT5000 [Automatic mechanical movement] Case material: 316L stainless steel Diameter: 56mm (including crown) Lug to Lug Length: 48mm (including lugs) Thickness: 15mm (including crystal) Lug to Lug Width: 22mm Total weight: about 210g Crystal: Sapphire crystal + Swiss AR Coating Dial: Enamel gray dial Hands: hour and minute hand GS manual polishing + flat top second hand Luminous: BGW-9 Luminous (light blue) Crown: Screwed Caseback: Screw-in Caseback Strap: fluororubber, width: 22*20mm Clasp: diving folding buckle Waterproof: 300 meters waterproof Warranty: Two-year warranty Note: The rotation of the bezel is a little bit vacant, caused by the structure, not a quality problem.

  • SAN MARTIN mechanical diving watch 200 meters waterproof SN0055G
    $335.00$445.00

    Model: SN0055G Movement: PT5000 and SW200-1 [automatic mechanical movement], ±10s Case: Material-316L stainless steel case 42mm in diameter (44mm in diameter including left and right lugs) Thickness 13mm (including mirror) Lug Width 18mm (the inner side where the strap is attached) Lug Lengh: 50mm from upper lug to lower lug Mirror: Sapphire bubble mirror (SWISS AR COATING) Dial: Gradient gray fire pattern plate Hand: GS craft batch bevel hour and minute hand, flat top second hand Bezel: stainless steel Luminous: BGW-9 super luminous, blue light Crown: screw-in Caseback: screw-in Strap: French BOX polished leather + French HAAS waterproof inner leather Clasp: 316L stainless steel Waterproof: 200 meters waterproof Weight: about 110g Warranty: Two-year warranty (The above data is measured manually, if there is any deviation, please refer to the actual product)

  • Textured cloth pattern cowhide strap 20mm pin buckle LS-03
    $55.00 $30.00
    Rated 0 out of 5

    Model: LS-03 Brand: San Martin Width: 20mm Buckle style: pin buckle Accessory Type: Leather Strap

  • San Martin stainless steel tool bracelet 22mm wide for SN0025 limited edition titanium diving watch
    $99.00 $70.00
    Rated 0 out of 5

    Material: Stainless Steel Width: 22mm Function: can be used as multifunctional tool Suitable for SN0025 limited edition titanium/stainless steel octopus diving watch

  • San Martin diving watch luminous mechanical watch SH068
    $350.00$511.00
    Rated 0 out of 5

    Model: SH068 Movement: SW200/PT5000 [automatic mechanical movement] Case: Material - 316L stainless steel 45mm in diameter (excluding crown) Thickness:13.5mm (including crystal) Lug width:22mm (with the inside of the strap) Crystal: sapphire crystal Bezel: 316L stainless steel bezel, 12 o'clock luminous scale Hands: Polyhedral steel hands, filled with luminous Luminous: C3 (green) super night light and BGW-9 (blue light) super luminous Crown: screw-in Caseback: screw-in three-dimensional hydraulic Caseback Strap: 316L stainless steel bracelet, width 22mm Clasp: professional diving fine-tuning steel buckle Waterproof: 500 meters waterproof Warranty: Two-year warranty (The above data may be subject to manual measurement errors, please refer to the actual product.)

  • SAN MARTIN mechanical diving watch 200 meters waterproof SN004-G-V2
    $390.00 $238.00
    Rated 0 out of 5

    Model: SN0004G-V2 Movement: YN55A Case: 316L stainless steel 38mm diameter (without crown) Lug to lug length 46mm Thickness 13mm (including crystal) Lug Width 20mm (with the inside of the strap) Crystal: Sapphire Crystal, imitating bubble mirror effect + Swiss AR COATING Dial: Matte black dial + printed three-dimensional hour markers Hands: batch flower hands plating gold Luminous: Retro luminous effect (luminous color: yellow-green) Crown: screw-down + three-dimensional s logo Caseback: Screw-down solid caseback Watch strap: solid steel bracelet(If you find the bracelet screws are hard to release, please kindly give it a proper heat like by a hairdryer, that will help, thanks!) Clasp: solid steel clasp Waterproof: 200 meters waterproof Total weight: about 140g Warranty: Two-year warranty

  • SAN MARTIN mechanical diving watch 200 meters waterproof SN045-G
    $235.00$258.00
    Rated 0 out of 5

    Model: SN045-G(Custom logo available, please click this link to see custom logo options and cost) Movement: Time Module NH35A Case: Material-316L stainless steel Diamater: 40.5mm (without crown) Lug to Lug Length: 43mm Thickness: 13.5mm (including Crystal) Lug to Lug Width: 20mm Crystal: Sapphire Crystal + AR Coating Dial: matt black + applied hour markers Hands: Brushed in the middle + polished on two sides, flat hap on second hand Bezel Insert: Ceramic Bezel Insert Luminous: C3 Super Luminous Crown: screw-in, three-dimensional shark logo Caseback: screw-in, three-dimensional shark logo Strap: fluororubber strap, size 20-18mm, stainless steel bracelet Clasp: 316L stainless steel Waterproof: 200 meters waterproof Weight: about 115g Warranty: Two-year warranty

  • SAN MARTIN self-designed limited edition mechanical diving titanium watch SN070-T
    $880.00 $680.00
    Rated 0 out of 5

    Model: SN070-T Movement: SW200 [Automatic mechanical movement] Case: Titanium 45mm in diameter (without crown) Thickness 15mm (including table mirror) Lug width 24mm (inside) Mirror: Sapphire crystal mirror Bezel: Titanium Dial: Gray gradient surface, Applied metal hour markers Hand: Multi-faceted Batch Flower Craft Luminous: BGW-9 (blue light) super luminous Crown: screw-in Caseback: Screw-in hydraulic caseback Strap: Titanium strap Clasp: Titanium professional diving buckle with micro adjust Weight: about 173g Waterproof: 500 meters waterproof Warranty: Two-year warranty (The above data is manual measurement, there may be errors, please refer to the actual product.)

  • San Martin Tin Bronze Diving Watch Automatic Mechanical Watch Retro Watch 200 Meter Waterproof SN042-Q
    $336.00$493.00
    Rated 0 out of 5

    Model: SN042-Q Movement: domestic PT5000 and imported SW200 [automatic mechanical movement] Case: CUSN8 tin bronze Case diameter: 41mm (excluding crown) Thickness: 12.5mm (including the mirror) Lug width: 22mm (with the inside of the strap) Crystal: sapphire crystal with AR-Coating Dial Color: blue, green and black Hands: middle drawing on both sides of the batch bevel Luminous: retro yellow luminous Crown: CUSN8 tin bronze hydraulic three-dimensional shark logo (screw bottom screw-in locking) Caseback: Screw-in caseback with hydraulic three-dimensional shark logo Strap: retro fleece leather strap, width 22mm Buckle: CUSN8 tin bronze Waterproof: 200 meters waterproof Weight: about 91g Warranty: Two-year warranty

X